Construction method
Step 1
Step 2
Step 3
Step 4
Step 5
Step 1
Step 2
Step 3
Step 4
Step 5
Important: Before construction, please read the construction standardization process in full.
Operation process description
(1)請於乾淨的乾燥的表面施工。先清掃地面，如髒污請用清水沖洗后，待地面完全乾燥后才可施工。（乾淨的鐵皮屋頂可直接施工）。
(2)清潔過程請務必留意，是否有青苔或是油漬?如果有，請務必將青苔或是油漬刷洗去除。
(3)開封後，不可加水或其他任何添加物，可直接使用，但務必需攪拌，如人工攪拌約一分鐘，機械棒攪拌約30秒。
(4)建議厚度第一道100um(如以毛刷或滾輪從左到右，右再到左為來回一次，100um則為來回約三次)，第二道300um(如以毛刷或滾輪則為來回八到九次)，總計兩次施工總厚度濕膜400um(0.04mm)。乾膜後約為250um(0.25mm)；因每位施工人員力道及使用習慣的不同，請以使用材質換算使用面積，分多次均勻塗佈於預計施工表面。(請參考注意事項9)
(5)第一道施工與第二道施工間隔約0.5-1小時，只要手摸表面不回黏即可施工。
(6)若是使用噴槍進行作業。噴塗距離約30-45公分、空壓機壓力8磅。
(7)刷塗請以一個方向刷塗，可避免刷痕。
(8)務必進行二次塗刷/噴塗，確保隔熱及防水效果為最佳狀態。
Construction Notes
(1)若是使用噴槍設備建議以最大口徑，可噴塗水泥的噴槍為主。若用其他設備，可能會因噴口太小或壓力不足而難以施工。
(2)若利用毛刷刷塗，必須以一個方向刷塗。乾燥後才能再次刷塗，並修補不夠完整的地方。
(3)施工時氣溫請不要低於18度。若低於18度c，乾膜過程中，可能會因此產生表面龜裂現象。
(4)達到最佳使用狀況需噴塗到標準厚度，主要是需達到標準施工厚度乾膜0.25mm。每層噴塗中間需等0.5~1小時，讓塗料表面完全乾燥。
(5)假若施工面為水泥RC或防水PU等材質，請務必於第一次施工時，加重力度施工，讓塗料與施工面緊密結合，避免塗料與施工面有縫隙。
(6)(6) It is recommended to brush the construction surface with clean water once a year to keep the surface clean as much as possible .。
(7)預計施工處不可有積水現象，否則可能有水解或產生水污的狀況，導致隔熱效果快速衰退。
(8)預計施工面若為pu材質，因pu有油漬及雜質，務必多次清洗後，施工時(施工流程4)動作務必確實，增加多次來回滾塗次數，將油漬及雜質推開。
(9)每桶5加侖，可施作水泥RC材質35平方米（約10坪），若有風化層則只能施作30平方米（約9坪）；可施作金屬材質45平方米（約13坪），如鐵皮屋、管路、設備、公交車等等，以上均為標準厚度，塗佈兩層後的面積。
(10)請留意天氣狀況，施工前後不可有降雨。建議18度C以上晴天施工。施工表面以手觸摸確認，確保無水分與濕氣後方可施作。若是雨天，水泥地面建議曬干1-2天后再施作。
If you have any questions during the construction, please feel free to contact us.：
上班時間周一到周五 09:00-18:00 (02)2641-1189
FAQ
What is the difference between your HeatAX ice paint nano coating and the thermal insulation paint on the market?
There are many brands on the market, and each brand has its own consumer group. It is recommended that consumers compare more and objectively compare the following points of various brands on the market:
(1) Is there any international certification? Does the manufacturer have relevantReportInstead of talking to yourself? Bingbing Paint has Taiwan CNS, US INTERTEK, China CMA, Singapore Green Mark and other relatedReport
(2) What kind of certification is this? Is this manufacturer's certification related to thermal insulation? Bingbing paint has complete reflectivity (SR) and reflectivity index (SRI)ReportThere is generally no reflectivity report, which only indicates that the coating or paint type is an environmentally friendly material.
(3) Are there any well-known manufacturers that can be used? If there are many well-known manufacturers, at least the procurement and testing of the manufacturers can help us make choices and ensure the quality. Bingbing Paint has served more than 100 companies and 1,000 general household users over the years.
(4) Is there a guarantee that the temperature will be reduced? If the manufacturer's thermal insulation coating or paint is effective, there should be a warranty and a cooling guarantee, rather than guaranteeing that it will not fall off or not having a relevant warranty to deceive consumers. Bingbing Paint has a complete pre- and post-construction report, which can clearly compare the temperature changes and temperature differences before and after construction. There is also a warranty that guarantees cooling, and if it cannot be done, no charge will be made.
HeatAX Ice-Coat Nano-Coating- How does it work?
HeatAX Ice Paint Nano Coating can reflect solar radiation heat sources, reduce the conduction and transfer of heat energy, and thus achieve heat insulation. The main function is to reflect sunlight. The overall energy distribution of sunlight includes: 9% ultraviolet light/40% visible light/51% near-infrared light. In order to effectively reflect sunlight, it is necessary to reflect visible light and near-infrared light. A relatively high reflectivity is required to prevent heat sources from scattering into the room. HeatAX Ice Paint Nano Coating exclusively introduces "Ninano Super Insulation" technology, with an SR thermal reflectivity of 0.90.1 and an SRI thermal reflectivity of 111.46, which is considered top performance.
Is HeatAX Ice Paint Nano Coating suitable for DIY?
Of course, DIY HeatAX Ice Paint Nano Coating is not troublesome at all. The use method is exactly the same as general paint. We do not need special tools and techniques. In many countries or regions, our dealers focus on DIY. If it is exterior painting, it is still recommended to professional masters. After all, this is for safety reasons. If you are just painting the roof yourself, DIY is not difficult at all.
When you receive the goods, you can refer to our official website for detailed construction instructions. You can use a regular paint roller, brush or spray gun.
Is it better than ordinary thermal insulation building materials?
Traditional insulation materials such as fiberglass, polystyrene foam, rock asbestos, etc., slow down the absorption of pure heat energy of radiant heat due to the thickness of the material.
Since it does not reflect or repel radiant heat, it absorbs and accumulates heat energy, causing the temperature of the structure and the room surface to gradually rise. When the heat source disappears, that is, at night, the heat energy accumulated inside the structure begins to evaporate slowly.
The insulation principle of HeatAX Ice Paint Nano Coating is different from traditional insulation materials. It reflects and rejects 90.1% of radiant heat, reduces the absorption of heat energy, and then blocks the conduction and transmission of heat energy through hollow materials. Compared with other insulation materials, the effect is better than the following traditional insulation materials:
- 25cm thick fiberglass
- 20cm coarse fiber filling
- 14cm thick polystyrene foam
Can you help me with the construction? Is the cooling guaranteed?
Of course, our factory has a dedicated construction team. We welcome your inquiries. If you need to build a scaffold or crane, the cost will be calculated separately. If the site conditions are dangerous, construction is difficult, and other environmental factors, we will inform you in advance whether the cost will be increased.
We provide a three-year performance warranty, a three-year product quality warranty, and a three-year free repair warranty. We also provide a clear temperature difference report and construction report before and after construction.
Does HeatAX Ice Paint Nano Coating have other colors?
HeatAX Ice Paint Nano Coating is pure white and can effectively prevent the absorption of light and heat. If you have special needs, you can also customize the color according to your needs. Color matching has a partial impact on thermal insulation performance. If you expect to get the best heat dissipation performance, it is recommended to use our standard products. In addition, the customization cost will be higher and there will be a minimum order quantity limit.
I often see reflectivity SR and reflectivity SRI? What do they mean?
In developed countries, the effectiveness of thermal insulation coatings is evaluated by observing reflectivity and reflectivity. The higher the reflectivity and reflectivity, the higher the proportion of solar radiation heat reflected, that is, the better the effect!
Ordinary white paints on the market have basic reflectivity. The reflectivity (SR) is roughly between 0.71 and 0.72, and the reflectivity index (SRI) is between 98 and 99. However, some companies in the market play word games and confuse consumers with reflectivity (SR) and reflectivity index (SRI).
How much temperature reduction can HeatAX Ice-Cream Nano Coating guarantee?
HeatAX Ice Paint Nano Coating has excellent performance and has been notarized by a certification unit. Any temperature difference experiment must first explain the environment, such as: What is the temperature of the atmosphere? (The higher the temperature, the greater the temperature difference, and the longer the sunshine time)? Is there ventilation? Is there anything exposed to the sun? Is there ventilation? Etc. These are all factors that will affect the temperature difference performance.
Our HeatAX Nano coating is the only thermal insulation coating that can set the environment without confusing it. Additional explanation for this: The one with HeatAX Nano coating is called A, and the one without is called B. The air temperature is above 35℃. Buildings A and B are not ventilated (no windows), have no spontaneous heat, and are not exposed to sunlight. They are located in the same geographical location. Starting from 8 am, the temperature of the same point in the two rooms A and B is measured every hour until 5 pm. The average indoor temperature difference can reach 13℃ with HeatAX Nano coating (this is the Chinese CMA test report method).
In Taiwan, if the original manufacturer provides the materials and labor, the warranty condition is that as long as the atmospheric temperature is above 32°C, the building or carrier is guaranteed to be exposed to direct sunlight for more than 30 minutes, and the surface temperature difference is at least 15°C, which can be maintained for more than three years. Every 1°C difference in indoor temperature can save 6% of air conditioning electricity costs. Enterprises can recover the difference in air conditioning electricity prices within 2 to 9 months (accumulated experience of actual customer groups as of September 2023). The longer the air conditioning is used and the larger the area, the faster the electricity cost will be recovered.
What materials can HeatAX Ice-Cream Nano Coating be used on?
Our HeatAX Ice Paint Nano Coating has passed the inspections of Taiwan SGS, Taiwan CNS, Singapore National Green Building Label, US Intertek, and China CMA Laboratory. Our HeatAX Ice Paint Nano Coating has very good adhesion.
The spray paint and roller coating of ordinary corrugated board can be used directly, and the coating will not fall off. Even the extremely high density glass can be directly coated. Ordinary tiles, cement, bricks, wood, metal, tiles, etc. are all no problem. This material can be directly coated without applying primer first. This is unattainable with ordinary coatings. It is because HeatAX Ice Paint Nano Coating is a real nano material.
How to compare the effect of HeatAX Nano Coating with that of a ventilation ball?
Each set of vents can only affect an area of about 2 pings, can only cool down 1-2℃, and must be equipped with a sprinkler system to achieve such an effect, not to mention the problem of water leakage! The sprinkler system will increase our water bills and may also cause the iron sheet to rust; in contrast, HeatAX Ice Paint Nano Coating not only has no water leakage problem, but also does not require the vents to be repaired, and does not require water bills to be paid. The effect is even more amazing, with an average surface temperature difference of 25℃ and an indoor cooling temperature of 7-10℃.
How long does HeatAX Ice Paint Nano Coating last?
HeatAX Ice Paint Nano Coating has been tested for more than 10 years on its products, and has also undergone relevant aging, salt spray, and weathering tests by Taiwan CNS, all of which have passed and obtained reports.
However, it may increase or decrease depending on the on-site environment. To ensure the best effect, it is recommended that you wash the painted surface once a year after the rainy season, or reapply a layer of HeatAX Ice Paint Nano Coating after 5 years (possibly due to environmental pollution problems) to keep the surface clean and tidy, so as to ensure the best heat insulation and reflection effect.
Have another question?
If you have further questions, please contact us.
